For Sale - Res-Q-Jack Telescoping Strut System (A2780) - PRICE: $3,990.00
Request More Info @ info@mvfd.com

RES-Q-JACK – Two aluminum 56 to 98 inch range telescoping struts. Excellent for vehicle stabilization. Quick and easy set up. Includes two struts, one jack and two base plates.

RES-Q-JACK SPECIFICATIONS (Item # ALX-STRT)
Column WLL – 9,700 lbs.
Lifting WLL – 6,000 lbs.
Extended Height – 98″
Collapsed Height – 56″
Weight – 42 lbs
Add-On-Jack Weight – 25 lbs

ALUMINUM LONG RES-Q-JACK INCLUDED COMPONENTS

1. Swivel CRG End Fitting
The Aluminum X-Strut comes standard with Swivel CRG head fitting which gives you a variety of purchase point options and rotates 360° to easily find any purchase point.

2. Ergonomic Cone Pins
Cone pin design features a flared end, making these pins easy to grip and hard to lose on scene. The flared end also helps automatically line up the available Add-On Jack for fast and easy attachment.

3. Rugged Aluminum Construction
The Aluminum X-Strut is built from durable high strength 6061-T6 aluminum for 9,700 lbs. of strength column load (6,700 lbs. point load and 5,700 lbs. chain grab).

4. Add-On-Jack (1)
The Aluminum X-Strut transforms from a shoring strut to a lifting strut in seconds with the removable mechanical Add-On Jack, giving 6,000 lbs. of lifting capacity with 12 inches of travel.
Need to lift more than a foot? Just remove the Add-On Jack and reset for 12 more inches of lift. Need a second jack? Just remove Add-On-Jack by pining strut and then install jack on second strut under load.

5. Built-In Ratchet Strap
The Aluminum X-Strut includes a ratchet strap with wire hooks mounted on the side of the strut chassis, keeping your strap right where you want it for faster response.

6. Strut-Mounted D-Ring
The Aluminum X-Strut includes an added D-Ring mounted directly to the strut chassis for added versatility in attaching additional straps and hooks.

7. Base-Mounted D-Rings
Pivoting rings built into the base plate allow for fast attachment of straps, hooks and chains, or double as a picket receiver when anchoring is needed.

8. Load Pad Base Plate (2)
The 14” x 14” steel load pads spread the load evenly over soft ground by spreading load over a larger area. Four carry holes double as stake holes, and the inner strut pocket is designed to snugly fit the strut base.

PRICE: $3,990.00
Request More Info @ info@mvfd.com